my first art video!

I’ve been playing with trying to video as I’m painting, and uploading to youtube as wordpress free site doesn’t support direct uploads.

This is a quick one showing what happened with a resin coat on an artwork I really like. I thought the resin would really enhance it but its full of tiny holes. Air bubbles I guess. Its a love hate thing, I love the look of resin finish, but hate the way its so easy to mess up. The cure time for this is only a few mins so I had to work quickly. I’ve had best results with pebeo, but that stuff costs so I’m trying a cheaper marine resin, which is a 1 part hardener to 50 parts resin so accuracy is essential. I’ve been weighing it though and now wonder if its a by volume percentage so need to read again to check. that might account for the ripples I have in the finish of the small ones, and two a did a couple of weeks back, compared to the lovely smooth glass like pebeo. My gran always said “cheap always comes dear in the end” and TBH I’m wondering if I just need to save resin for the favourites and suck up the extra cost.
I’ve also been experimenting with argon oil, hair conditioner and handcream in my quest for Big cells. I did go back to my original silicon too as got some good cells with that but I’d forgotten how it affected the paint, making surface uneven and leaving holes in pics every now and then which is why I stopped. I’ll show pics of those when dry. Suffice to say none were a great sucess, so I’m about to order dimethicone…….
I also had a good day gessoing lots of old canvases, pics I don’t like any more so I’ve a lovely batch ready for painting. Did a couple of big MDF bits I had lying round too.

Advertisements

a few more experiments, and reusing old canvas

Been busy last few days but still squeezed in a few experiments. I didn’t like the last two I showed here so over-painted them, and still don’t like one of them, so that’s in the pile to repaint!

This one looked great on pouring, but I didn’t make enough paint….so on tilting it ended like this ;-( Sometimes I gesso over old works, or paint a coat of one colour but my original thinking here was that I could maybe just cover the bit I didn’t like and keep the edges that I did. soon as I poured though I could see that wouldn’t work.


I tried playing with white negative space – I’d aimed at that before unsuccessfully so time to retry. I only used white plus 3 reds, and a red mica paint. But didn’t like it so it became the second one shown here

I’d actually used the same colours as on this long one but the centre of the red one was still a little wet, though I hadn’t realised so some of the painting has a pink tinge to the white. I don’t mind, quite like it.

I really like this one and may…or not, brave the resin for it! Next play was negative space again, and three blues, plus a mica mix. More successful but I still want more white,. more subtlety. I tilted too much once more…

I used leftover and run-off onto some paper but TBH I’m not happy, its just a murky blue mess to me..

I love the pour on this next one but again lost it on tilting 😦 

I thought maybe it was my tilting, so made LOADS of paint and let it find its own way to edge, but I still ended losing that first lovely part, and had a tray full of mixed leftover paint. Maybe its s thickness thing? Its not because painting isn’t level. having lost a few now to that i work really hard at that before paint touches canvas, and check how it drips after before leaving it.
Then I saw a vid where anne-marie ridderhof ( I love her and danny clark vids) used 1 part paint to 4 parts floetrol, no water, no alchohol. as my paints are heavy body and she used fluids I thinned mine down first with water – big mistake! Looked ok on pour, though very pale, but floetrol is cloudy then dries transparent so hoped that was it. Nope, I just got a watery thin mess. Horrible isn’t it.?? Its over an old one, blue based and you can see the blue through the white edges. Next time I’ll try with paints as they are! The yellow is lumpy too – I mix and mix but that yellow, and the white seem to contain or go lumpy, and i miss it. I got my little battery milk frother out yesterday for mixing. well, I never use it for milk! more and more “house” stuff ends in art shed, I’m sure we all do it!

I’m still thinking of resin and whether to use it. I did it on two 8 x 10 inch ones, and love it but there are ripples in the surface. This was the slightly cheaper marine resin, rather than pebeo. Its a 1:50 ratio so as it took days to cure, with surface staying slightly tacky, you know, where you can see fingerprints even though it seems dry, so maybe i didn’t quite get that right. Its harder with that small amount of hardener to be precise, whereas the pebeo was either 1:1 or 1:2 – can’t remember but easier and i like the finish better. Did the pebeo on 3 3×3 canvasses to trial. On those I’ve a couple of little dints even after two coats so I’d seen a varnish that it supposed to help with ripples and dents on resin finishes, so bought that and tried yesterday. It evened the ripples a little but I think the sine is a bit less, and on the small one it helped with the dint/dent but again reduced the glossy shine. I don’t know if maybe once its thoroughly dry it would come back if it was polished with a little wax or something? I also want to try it over a conventional varnish, see how that looks…
The one on the left is the one with the aerosol extra coating. It looks a bit smoother but the colours don’t seem as bright and the gloss is less.

I’m hoping to create a links page with all the materials I’ve used soon. Just need to find time to work out how to do it 😉 Then if anyone wants to use what I’ve tried you’ll know where to find it. I know I’ve found lots of my experiments from other people’s pages and links are always helpful, but I’m not greatly tech minded so it takes time for me to work out how to do the wordpress page stuff, without it just being a jumbled mess.

 

 

Resin once more.

Sunday I tried resin again on two 3×3 inch paintings, it set well but….i thought they were level, i was wrong, very wrong so one side is perfect but it ran off the other. So monday i tried again, this time using spirit level. Much better result, still not perfect, a couple of dints in surface and i still need a more stable surface, as where the paint did run a little I’ve now got lumps on back – hopefully can sand off. For future tries (hah!) I want to find somewhere indoors instead of shed, where there’s more space and i won’t risk knocking them, and set up an exactly level surface. also try pinning plastic to reverse in hope drips stick to that and not my canvas..maybe 😉 Anyway here’s the results. I really love this resin effect but i’m nearly out of resin, £16 quid gone on trying to get it right. I’ll keep these, I don’t think they’re good enough to sell but I like them. I love that the surface is like glass to touch and really shows a depth in the colours that plain varnish just doesn’t seem to. Plain varnish is easier and a heck of a lot cheaper though so unless some spare cash floats my way resin experiments are on their way out for now. I’ve enough left for maybe one more go – maybe two 3x3inch paintings. I might mix a tiny amount and fill the dints and thin patches on these first though.

You can see where the canvas tore on back of this one when I unstuck it ( with difficulty and a Stanley knife, watching my fingers carefully!!)

the surface of the one above.

this is the thin edge of one where it wasn’t quite level.


here’s one almost perfect except for that little dint in the top centre

here’s all three.