I’ve used all of these, some with success, some indifferent and some not really working for me. I’ll be adding to this page constantly as I find new things to try. Click on images for links or on words where I’ve managed to work it out…tech and I aren’t best friends so apologies now for where I’ve got things wrong!!
These are mostly Amazon and eBay sites, other stuff tends to come from small independent shops or materials I’ve had ages and can’t recall where from. I do get a small commission from the Amazon affiliate links and you may find products cheaper elsewhere. Mostly I look for cheapest I can get delivered as I don’t drive so amazon with Prime works for me.
This is Alcohol, and here supposed to help with cell formation. I’ve been using this, TBH sometimes I forget and its been fine, but depends on what look you want. I’ve also just received a higher % alcohol that I’ve not yet tried ( second image). I’ll report if it’s any better after I’ve used it.
This also comes in 2.5 ltr which is what I now use, and I think the last one I bought was from ebay which was a little cheaper but prices change quickly there sometimes.
Windsor & Newton flow improver. tried this before I could get Liquitex, and before I tried Floetrol. It works but this tiny bottle doesn’t go far if you use lots as I do…..
Spray silicon. the first one I tried but I found getting it into the paint difficult. I’d spray into cup then put my hand over but still seemed more in air than in paint. It is useful to spray into cups before pouring paint in, helps it tip out. I tend to spray the dirty cup before adding paint. On the plastic cups it works well, but as I kept tipping them over I now use paper ones and it isn’t quite as good there. maybe the paper absorbs it? who knows? I’ve seen US folk use Blaster silicon, but couldn’t find it here and others use WD40 but I haven’t tried it.
Cymethicone silicon. I found this left thin patches in the paint but others use it without problems.
Butane torch. I found this a little small so bought a bigger one, but again, quite often i don’t need to torch at all, or torching doesn’t make any difference so its not essential.
This is the second one I bought, first from another seller had no working piezo so I had to light with matches, no response from seller so I left a one star review and bought this one which is perfect. Keep torch away from canvas, I aim for about 8-10 inches as paint will steam and burn, and that’s not a good look! Gas canisters are here. A fire extinguisher is a good idea too, as with alchohol, silicon and varnishes etc in one place its safer to have something to hand to put out fires. This one I have comes with wall mount and a fire blanket. I have it right next to where I’m working. Its a powder aerosol one so not a single use one but can be reused. That makes it cheaper. actually I’m off to get a second one for indoors as I can’t find my one I’ve had ages and do have a habit of setting light to things accidentally….Its currently on special offer at £10.99 – much cheaper than others I’ve seen, but I don’t know how long it’ll be at this price.
Lolly sticks for mixing. these jumbo ones are great with bigger cups, and I’ve smaller ones for the shot glasses.
Disposable gloves, great for us messy folk! I use loads. Tip: handcream is great for removing dried acrylic paint, rub all over and wipe with kitchen roll.
I use canvasses from lots of different places, but bought some on amazon, and I’ve old ones from places like ken bromley. I also use pieces of board, canvas board and wax art paper and acrylic art paper. Ordinary watercolour just soaks up the paint, it needs to have a coating of some kind.
I’ve been using a lot of these R&L paints as they come in 500ml pots. I do find the lids tend to flip back as I pour though so have to hold them back with my pinky finger, otherwise I end up with big lump paint in the lid and then it dries and won’t shut (oops, just put an i instead of the u….) properly.
This is R&L white, in 500 ml. I’m currently trying Dulux white housepaint as I use so much white, and it makes it much cheaper. Initial results look good. I wouldn’t use t for more expensive artworks but these are around £20-40 depending on size so anything to keep costs down and hopefully sell more is good. More money for new “stuff” !! R&L is around £8 for 500ml while the Dulux is currently £10 for 5lt. big difference. (Edit: I used the Dulux too thick and its cracked – at least I think that’s the reason so take care)
W&N white. Ran out of white and couldn’t get R&L, but these two are pretty interchangeable IMO
Mars Black. a lovely rich inky black
R&L primary yellow. I like to have a range of colours and this is a nice bright yellow
Primary Magenta – gorgeous rich almost fuschia pink
Windsor & Newton. I wanted an alizarin type red, this crimson is pretty close to what I wanted.
Cadmium Red, a nice bright red
Cobalt Violet, a very blue toned purple
Cerulean, a colour I use lots. Makes some fun greens.
W&N Gloss varnish. I’ve used it a couple of times, its OK, not particularly glossy, quite a subtle shine. Maybe if I added more coats, I’ve only done two. I prefer others, the triple thick deco or the miniwax
Triple Thick. this only needs one coat but is quite “gloopy” so you need to be careful when using
Pebeo Resin. My favourite finish but very expensive especially if like me you find cocking things up very easy……I’ve tried a cheaper marine varnish but that’s a 1:50 ratio instead of 1:2 as this is and far easier to get wrong, leading to poor finish or even not curing at all. So far I haven’t got it exactly right ;-(